EOA / ABR Tipo Screening
14 July, 2017



Evaluación Audiológica

Características del Neuro Audio

  • Respuesta auditiva de tallo cerebral (ABR)/audiometría de respuesta auditiva de tallo cerebral (BERA)
  • Respuesta auditiva de estado estable (ASSR) con posibilidad de estimulación a 4 frecuencias en ambos oídos simultáneamente (multi-ASSR)
  • Transiente evocado de emisiones otoacústicas (TEOAE)
  • Producto de distorsión de emisiones otoacústicas (DPOAE)
  • Emisión otoacústica espóntánea (SOAE)
  • Potenciales evocados auditivos de media y larga latencia (MLR, LLR/CAEP)
  • Potencial evocado miogénico vestíbular (VEMP)
  • Audiometría de tono puro (PTA) (conducción aire y ósea)
  • Electrococleografía (ECochG)
  • Potenciales evocados cognitivos (MMN, P300)


Neuro-Audio (version 2010) viewNeuro-Audio

Un solo equipo para todas las pruebas audiológicas

Todas las pruebas que se necesitan en la práctica diaria en un único dispositivo de tamaño de un libro pequeño, potenciado por un único cable USB desde su computadora personal.

  • Un cable USB para conectar el equipo a la PC
  • Conjunto de conectores a un lado del equipo para todos los estimuladores: audífonos, auriculares insertables, sonda de EOA y vibrador óseo
  • 5 conectores touch-proof para los electrodos
  • 2 conectores DIN
  • indicador LED de impedancia y botón “medir impedancia”
  • conector trig-in y trig-out para conectar DIB de implante coclear, por ejemplo

No se necesita mas equipos, cables, baterias, cargadores o fuentes de alimentación!

Compatible con transductores de diferentes marcas disponibles en el mercado

  • Audífonos: Auditory stimulator for EP (TDH-39 acoustically shielded headphones), Auditory stimulator for EP (HDA-280 headphones)
  • High-frequency headphones: HDA-200, ER-2
  • Insert earphones: EAR-5A, EAR-3A (10, 50, 300 Ohm; automatic 0.9 ms acoustic delay correction)
  • Auditory stimulator for EP (bone vibrator)
  • OAE probes: OAE probe(Neurosoft), ER-10D probe
  • Loudspeakers for sound-field testing (must be individually calibrated)

The software specifies ipsi- and contra-lateral curves in multi-channel recording.

Simple and Fast Workflow

Neuro-Audio.NET software provides a simple workflow to perform tests.

Step 1. Enter patient‘s information to the database

Step 2. Select from the list what test you want to do

Step 3. Press “Run” button and test is performed automatically

Step 4. Once a test is done, software tries to arrange the markers automatically, however, you can correct them manually. Immediately you see all related graphs and tables. If reference values are set for this test, you see all figures compared with reference numbers

Step 5. Press “Report” button and report is generated in editable format (Microsoft Word)

Unlimited Flexibility

When the software is installed, all tests are preset for daily practice. And you do not need to make any changes. But when you need it, you can change practically any parameter you wish: parameters of acquisition and stimulation, window layout, colors, report, etc.

Shortest ABR Acquisition Time

Neuro-Audio.NET has several signal processing features which significantly decrease ABR acquisition time:

  1. Weighted averaging decreases required quantity of sweeps to get a clear trace
  2. “Minimize interference” feature helps to reduce electrical interference
  3. Chirp stimulus activates all cochlear hair cells simultaneously which increases signal amplitude
  4. High frequency stimulation. Even at 50 Hz stimulation you still clearly see peak V. But this decreases test duration by up to 5 times comparing with 11 Hz stimulation
  5. Statistical algorithms for online objective analysis of waveforms for response presence (Fsp/Fmp) eliminate observer‘s subjectivity and save valuable test time

Fast ABR Analysis

  1. Automatic ABR marker arrangement with possibility of manual correction A/B buffers to check reproducibility quickly
  2. Automatically displayed normative data (reference values) based on patient’s age
  3. Latency/intensity graphs and analysis tables
  4. 64-bit data processing on 64-bit computers

Automatic ABR Threshold Search Protocol

ABR threshold search is one of the most widespread routine tests in objective audiometry. We developed a special automatic ABR protocol “Objective hearing threshold search”. In this mode the whole process is done automatically. You need only to prepare a patient, start this protocol and simply observe the procedure, stopping it when you see the threshold.

New and Traditional ABR

  • Traditional click ABR
  • Tone burst ABR to estimate frequency-specific hearing thresholds
  • Bone conduction ABR for infants with ear canal atresia or other structural malformations
  • Chirp ABR (wideband, frequency-specific)
  • Electric ABR (EABR) for patients with cochlear implants

Screening Mode for OAE

DPOAE and TEOAE tests can be performed in screening mode. In this mode minimum interaction with the machine is needed to perform the test. Software tells you what to do next or does it automatically. The results appear as a simple phrase “PASS” or “REFER”. Technician can be easily trained to perform screening tests.

12-point DPOAE mode is available (with frequencies up to 12 kHz).

Multi-ASSR: State of the Art Implementation

  • Minimization of test duration: stimulation of both ears simultaneously using 4 carrier frequencies (500 Hz, 1 kHz, 2 kHz and 4 kHz) in each ear.
  • Independent intensity control for each of 8 stimuli.
  • Effective stimulus enhancing the response amplitude (exponential modulation, narrow-band chirp)
  • Accurate objective technique of response detection (F-test)
  • Two-channel recording improves the signal-to-noise ratio and reduces test time
  • The same electrode placement as in ABR can be used
  • Automatic conversion of frequency-specific ASSR thresholds to estimated audiogram
  • Weighted averaging (with improved accuracy, reduced test time)
  • Independence from patient’s state (2 modulation modes: awake (40 Hz) and asleep (90 Hz))
  • Modulation mode can be changed during test (if awake patient fell asleep, for example)
  • Monitoring of response amplitude and noise floor per ear and per frequency
  • All ASSR data are displayed on a single screen (including response probability and spectrum)
  • Pure Tone Audiometry with up to 16 kHz Stimulation

    Pure tone audiometry test with air and bone conduction can be performed with the same device and in the same software, with the same interface which is used for objective test. You do not need to register or recall your patient when you go to PTA test. You just press “New test” button.

    Test can be performed automatically (Hughson-Westlake algorithm), or you can control it manually using hot keys on PC keyboard. Patient responds to the stimulus using a remote button.

    High-frequency audiometry is supported (up to 16 kHz) with these transducers: HDA-200 and ER-2.

    VEMP with Biofeedback

  • cVEMP (cervical) and oVEMP (ocular) test templates
  • EMG-controlled recording
  • Biofeedback: patient’s monitor to observe muscle tension
  • Automatic calculation of VEMP ratio (right-left asymmetry)

And More

  • Traditional single-frequency ASSR
  • MLR, LLR: middle and long-latency evoked potentials
  • You can use calibrated loudspeakers to perform tests in a free sound field
  • MMN and P300 for cognitive function evaluation
  • ECochG: electrocochleography test

At the Cutting Edge of Science

Access to all amplifier, stimulator and signal processing settings allows you to create your own custom test templates, for all your scientific research needs. And if you feel you miss some flexibility or feature, you can always contact our powerful engineering team directly. We are open to innovations!

Some of supported transducersSome of supported transducers
Simple and fast workflowSimple and fast workflow
EABR testEABR test
DPOAE testDPOAE test
Multi-ASSR testMulti-ASSR test
Multi-ASSR: estimated audiogramMulti-ASSR: estimated audiogram
16 kHz pure tone audiometry16 kHz pure tone audiometry
VEMP with biofeedbackVEMP with biofeedback
Traditional single-frequency ASSRTraditional single-frequency ASSR

Variants of Delivery Set

Three delivery set variants are available, these are Neuro-Audio (version 2010), Neuro-Audio/OAE (version 2010)Neuro-Audio/ABR (version 2010)

Available Techniques Neuro-Audio Neuro-Audio/OAE Neuro-Audio/ABR
ABR / BERA + ABR option* +
TEOAE + + OAE option*
VEMP VEMP option*
ASSR bundle ASSR option and Multi-ASSR option*
ASSR ASSR option*
Multi-ASSR Multi-ASSR option*
ECochG ECochG option*
Cognitive EP (MMN, P300) Cognitive EP option*
PTA PTA option*

+ included in the base delivery set
* is supplied optionally by special order

Neuro-Audio (version 2010) Delivery Set

Neuro-Audio (version 2010) Extra Delivery Set

  • Neuro-Audio/VEMP software (“Neuro-Audio.NET” software with VEMP module)
  • Neuro-Audio/ASSR software (“Neuro-Audio.NET” software with ASSR module)
  • Neuro-Audio/Multi-ASSR software (“Neuro-Audio.NET” software with Multi-ASSR module)
  • Neuro-Audio/P300 software (“Neuro-Audio.NET” software with P300 module)
  • Cognitive EP option (software and equipment for cognitive (P300) EP recording, analysis and storage)
  • Neuro-Audio/ECochG software (“Neuro-Audio.NET” software with ECochG module)
  • ECochG option (software and equipment for ECochG recording, analysis and storage)
  • Neuro-Audio/PTA software (“Neuro-Audio.NET” software with PTA module)
  • PTA option (software and equipment for pure tone audiometry)
  • Insert earphone


Reviews (0)


There are no reviews yet.

Be the first to review “EOA / ASSR / EChoG / VEMP”

Your email address will not be published. Required fields are marked *